Fold Down
Rotary Hoist
Retractable
Portable
Ceiling Airer
Covers
How to Restring a Wall Mounted Clothesline
Restringing a wall mounted clothesline is a relatively simple task that can be accomplished with a few basic tools--and a bit of patience!
In this comprehensive guide, we will walk you through the step-by-step process of restringing a wall mounted clothesline easily.
A wall mounted clothesline is a convenient and eco-friendly solution for drying clothes indoors or outdoors.
But over time, the clothesline will inevitably lose tension or become worn out requiring restringing.
Topics in This Article:
Introduction
In this comprehensive guide, we will walk you through the step-by-step process of restringing a wall mounted clothesline easily.
By following these instructions, you will be able to restore the functionality of your clothesline and ensure it operates optimally.
Whether you are a seasoned DIY enthusiast or a beginner, this tutorial will equip you with the knowledge and skills needed to successfully restring your clothesline.
Now, get your tools and fresh pack of clothesline cord ready so we can breathe a new life into your much-loved fold down clothesline!
Tools and Materials Required for Restringing a Clothesline
Before we get started with the steps to take for restringing your wall mounted clothesline fold down clothes line, refer to the list below for to guarantee a smooth wall mounted clothesline restringing process:
A new pack of replacement clothesline cord/wire of your preferred brand
Scissors, wire cutter, or a utility knife to trim the clothesline cord to the appropriate length
Pliers to remove the old line and to tighten the new line
Replacement Line Tie Off or Tensioner Assembly (if required)
The Best Clothesline Cords to Buy
Austral 40m Clothesline Cord Pack
Proudly Aussie-made, this fibre-reinforced PVC cord pack is designed specifically for the harsh Australian climate.
Hills 65m Clothesline Replacement Pack
Made by the legendary Hills brand, it boasts Hills' patented Polycore technology for durability and minimal sagging.
Austral Galvanised Clothesline Wire
101% designed and made in Australia, this durable galvanised clothesline wire is the last one you'll ever need.
How to Remove Old Wall Mounted Clothesline Cord
1. Cut
Start by cutting and removing the old worn-out line from the tie offs or tensioner that holds it in place.
It's a good idea to consult the user's manual for guidance on this step because this procedure may require more steps depending on your clothesline model.
2. Inspect
Take a close look at the hooks, tensioners, or line tie offs to ensure they are securely attached and in good condition.
If you notice any signs of weakness, fading, or damage, it's important to replace them straight away.
3. Clean
Use a stiff wire brush or sandpaper to clean the hooks, tensioners, or line tie offs.
Removing any rust or debris that may have accumulated over time is great way to prevent further damage to the frame of your clothesline.
4. Improvise
If replacing the hooks, tensioners, or line tie off is not possible, consider applying a coat of UV and rust-resistant paint to protect them from the elements.
This can help extend their lifespan and prevent further damage by keeping them from getting even more brittle.
Step-by-step Guide on Restringing a Wall Mounted Clothesline
-
Begin by lifting the clothesline frame up from the wall and locking it in place. If you have a dual-frame clothesline, it's best to focus on the inner frame first.
-
Take the new cord and thread it through the first hole on the clothesline frame. Start with the inner holes and then move on to the outer ones. Ensure that the cord is properly aligned and securely threaded through each hole.
-
Once the cord is threaded through, secure one end of the cord using one of the tie offs or tensioners provided. Make sure it is tightly secured to prevent any slippage, leaving the other tensioner/tie off loose for the next step (adjusting the tension).
If you are working with a double frame fold down clothesline, fold the inner frame towards the wall and repeat the above steps for the outer frame.
Adjusting the Tension of the Replacement Clothesline Cord
-
If the cord is too loose you will need to increase the tension and if it's too tight, you will need to reduce the tension.
-
To increase tension, pull the cord starting from the end of the cord that's securely fastened to the tensioner.
-
To reduce tension, gently push or pull the cord to release some of the tension but be careful not to release it completely as you still want the cord to be adequately taut.
-
Continue adjusting the tension gradually, checking the tightness of the cord as you go, aim for a firm and taut line taking into consideration the tautness of the cord when the clothesline is fully loaded with wet clothes.
-
Once you have achieved the desired tension proceed to secure the tensioning mechanism by tightening the knob, fastening the cord to the tie off, or following the specific method for your
Test the tension by hanging a few lightweight items on the clothesline, make sure that the cord holds the weight without sagging too much.
Final Words
By following the steps we've provided in this guide, you can properly prepare your clothesline for restringing--guaranteeing its long service life.
Take your time when cutting and detaching the worn-out line, inspecting weak or damaged hooks or tensioners, and cleaning the frame.
Doing so protects your clothesline frame from rust ensuring that your investment will last a lifetime.
Always remember to refer to your clothesline's user manual should you encounter any unwanted roadblocks and for specific instructions related to your particular wall mounted clothesline model.
Now that you're done, it's time to enjoy the fact that you've just breathed new life into your investment, completely set for years of hassle free, eco-friendly clothes drying experience!
